Short answer: An AnTech dosing pump is a pump listed under the AnTech brand in Enelsa’s product catalogue that delivers liquid chemicals such as chlorine and pH correctors into water in set quantities. The catalogue includes the electromagnetic Nova, Lara, Optima and Nano series, the peristaltic Aspendose series and the mechanical diaphragm EMD series. AQUABELLA is the official distributor of AnTech in Türkiye; the 38 electromagnetic AnTech dosing pumps on our site are sold backed by AQUABELLA, with free shipping within Türkiye and international shipping quoted per order.
On this page we introduce the AnTech brand, the product groups in its catalogue and the four electromagnetic series sold on our site. These series cover a nominal flow range of 2–25 L/h and a back pressure range of 5–20 bar; each one addresses a different control requirement. If you are looking for a chlorine dosing pump, you can choose the series with the comparison table below, and to see every capacity individually, go to our chlorine dosing pump models page.
Who Is AnTech? Enelsa and the AnTech Brand
AnTech is the brand used in Enelsa’s product catalogue for dosing pumps, measurement and control instruments, sensors and ready-made systems. The back cover of the catalogue gives the company name as Enelsa Endüstriyel Elektronik İnş. Taah. San. Tic. Ltd. Şti. and the factory address as Antalya Organised Industrial Zone. The expression “Enelsa AnTech” refers to the manufacturer and the brand together.
The catalogue introduces AnTech in the opening texts of its product sections as follows:
- Dosing pumps: Dosing pumps transfer a defined liquid from one container to another or into a process; the transfer can be into open and closed containers or into pressurised lines. The catalogue states that AnTech models are offered that can dose with an accuracy finer than 0.1 ml, using microcontroller control and solenoid technology.
- Capacity: There are electromagnetic models that dose up to 25 litres per hour at 5 bar back pressure for high flow, and up to 3.5 litres per hour at 20 bar back pressure for high pressure. Higher flow rates are covered by the mechanical diaphragm EMD series.
- Field experience: The measurement and control instruments section states that AnTech has transferred more than 25 years of field experience into its product menus as solution packages.
- Applications: The sensor section lists drinking water, wastewater, cooling tower and swimming pool applications, as well as food, beverage, dairy, textile, paint and leather factories.
- Ready-made systems: AnTech offers ready-made packages that combine the measurement and control instrument, dosing pumps, sensors, sample flow cells and calibration solutions on one panel; the catalogue also states that custom packages are prepared for special applications.
All the information in this section is taken from the AnTech 2025 Product Catalogue.
AQUABELLA: Official Distributor of AnTech in Türkiye
AQUABELLA is the official distributor of AnTech dosing pumps in Türkiye and sells every AnTech product on our site backed by AQUABELLA. When you buy from our site:
- Original products: Pumps are shipped in their original packaging. The technical data on the product pages is taken from the current AnTech catalogue.
- Shipping: Shipping is free within Türkiye; international shipping is quoted per order.
- Clear prices: Prices are shown in USD excluding VAT and are recalculated every day according to the exchange rate; export orders are confirmed with a quotation.
- Selection support: Send us the water flow rate, the line pressure at the injection point, the chemical and your control requirements, and we will determine the right AnTech model together.
- Service: We provide installation, maintenance, calibration, repair and spare part replacement services.
AQUABELLA operates under AQUA TURCO Su Arıtma Cihazları San. Tic. Ltd. Şti. (Pendik, Istanbul). You can learn more about our company on our about us page.
AnTech Product Groups: What Is in the Catalogue?
The AnTech 2025 Product Catalogue has twelve product sections: dosing pumps, measurement and control instruments, disinfection systems, salt chlorine generators, ready-made systems, sensors, auxiliary equipment, mixers, water meters, blowers, portable instruments and test kits, and spare parts. At present the dosing pumps from these sections (electromagnetic, mechanical diaphragm and peristaltic) are sold on our site; you can get information and prices for the other products by writing to us.
| Catalogue section | Products in the catalogue | On our site |
|---|---|---|
| Dosing pumps: electromagnetic | Nova, Lara, Optima and Nano series | 38 models on sale, in the dosing pumps category |
| Dosing pumps: peristaltic | Aspendose A, DMS and PR; dishwasher and OEM models | A, DMS and PR on the site; write to us for dishwasher and OEM models |
| Dosing pumps: mechanical diaphragm | EMD-P with plastic housing and EMD-M with metal housing | On the site, 42 models |
| Measurement and control instruments | Omnicon (from one to six parameters), Poolsaver Tetra (pH and ORP), Aquameter (pH, ORP, conductivity), Filtersoft (filter and softener valve control) | In the catalogue; write to us for information |
| Disinfection systems | Chlorine dioxide generator (100 and 200 g/h), hypochlorous acid generator | In the catalogue; write to us for information |
| Salt chlorine generators and systems | Salt Ionic series and panel-mounted salt chlorine systems | In the catalogue; write to us for information |
| Systems | Pool control systems, Omnicon and Aquameter measurement and control systems, cooling tower pH–conductivity and blowdown systems | In the catalogue; write to us for information |
| Sensors | pH, ORP and conductivity electrodes; selective sensors for free chlorine, total chlorine, chlorine dioxide, hydrogen peroxide and ozone; amperometric free chlorine cell; dissolved oxygen, turbidity and temperature sensors; calibration solutions | In the catalogue; write to us for information |
| Auxiliary equipment | Electrode housings, sensor holders, anti-siphon valve, information panels, intermediate connection parts | In the catalogue; write to us for information |
| Mixers, water meters, blowers | Mixers and chemical tanks, cold water meters with signal output, single- and two-stage blowers | In the catalogue; write to us for information |
| Portable instruments and test kits | pH, ORP, conductivity and salinity meters, pool water test kits and measuring reagents | In the catalogue; write to us for information |
| Spare parts | Head assemblies, check valve sets, suction and discharge assemblies, hose and mounting kits | Compatible parts are listed on each pump page |
For technical information and prices on the products marked “write to us” in the table, contact us through our contact page, by phone or on WhatsApp.
AnTech Chlorine Dosing Pump Series: Comparison Table
The AnTech chlorine dosing pumps on our site come from four electromagnetic series: Nova, Lara, Optima and Nano. The series differ in control options, capacity range and power supply. For comparison, the table also includes the peristaltic and mechanical diaphragm series from the catalogue.
| Series | Control types | Flow range | Max. back pressure | Supply and power |
|---|---|---|---|---|
| AnTech Nova (12 models) | A: analogue, level control · D: digital, volumetric · DMPR: pH/ORP measurement · DMİA: free chlorine measurement | 3.5–25 L/h | 5–20 bar | 95–260 V AC, 50–60 Hz, auto-adapting · 15–27 W |
| AnTech Lara (20 models) | A: analogue · APS: level control · DS: digital, timer · DMS: digital, volumetric · PR: pH/ORP measurement | 2–10 L/h | 5–20 bar | 230 V AC, 50 Hz · 17 W |
| AnTech Optima (4 models) | A: analogue; Viton or Teflon O-ring | 2.5–5 L/h | 10–15 bar | 230 V AC, 50–60 Hz · 20 W |
| AnTech Nano (2 models) | A: analogue | 2–5 L/h | 5–10 bar | 230 V AC, 50 Hz · 10 W |
| Aspendose, peristaltic (in the catalogue) | A: analogue · DMS: digital, volumetric · PR: pH/ORP measurement | 0.001–5.1 L/h | 0.5–3 bar | A: 95–260 V AC · DMS and PR: AC 100–240 V or DC 12–28 V |
| EMD, mechanical diaphragm (in the catalogue) | Manual 0–100% capacity adjustment; adjustment with a motor drive accepting 4–20 mA input | 14–630 L/h (50 Hz) | 3–7 bar | Electric motor · 0.09–0.37 kW |
The flow ranges are the nominal values (at maximum pressure) from the catalogue. For the Nova and Optima, the catalogue also gives flow as a function of back pressure: the Nova 25 L/h model reaches 55 L/h at 0.1 bar, and the Optima 5 L/h model 10 L/h at 1 bar.
The four electromagnetic series share the same basic design: an electromagnet controlled by an electronic circuit, a PTFE (Teflon) diaphragm, zirconia balls and an IP65-rated housing. On the Nova, Lara and Optima the pump head is PVDF. Pumps are fitted with Viton O-rings as standard; according to a catalogue note, EPDM and Teflon options for the Nova and Lara, and an EPDM option for the Optima, are available on request. The Optima version with Teflon O-rings is sold as a separate model on our site.
Which AnTech Series Suits Which Job?
When choosing a series, look first at the control requirement and then at flow rate and line pressure: if the flow is constant, choose an analogue model; if the water flow varies, a volumetric model with water meter input; and if the chlorine demand varies, a measurement-controlled model.
- Home, villa and small workplace, constant flow: Nano A or Lara A. With 10 W power and a weight of 1.76 kg, the AnTech Nano A 2 L/h 10 Bar is the lightest and lowest-consumption model among AnTech electromagnetic pumps.
- Monitoring the chemical tank: The Lara APS and Nova A work with a suction assembly with a level sensor. The 1/10 step on the AnTech Lara APS 2 L/h 10 Bar makes adjustment easier at low flow rates.
- Line with flow that varies during the day: The AnTech Lara DMS 5 L/h 7 Bar or the Nova D doses chemical in proportion to the water passing through, using the signal from a water meter.
- Chlorine and pH control in a pool: The AnTech Lara PR 5 L/h 7 Bar or the Nova DMPR adjusts the dose according to ORP or pH measurement. Separate pumps are used for chlorine and pH.
- Monitoring free chlorine in ppm in a drinking water tank: The AnTech Nova DMİA 10 L/h 10 Bar measures free chlorine with an amperometric sensor; the sensor is selected separately.
- Line pressure above 10 bar: Nova 3.5 L/h (20 bar), Lara 2 L/h 20 bar or Optima 2.5 L/h (15 bar).
- Hundreds of litres per hour, or a gas-forming chemical: look at EMD mechanical diaphragm pumps for high flow and Aspendose peristaltic pumps for gas-forming chemicals; if you are undecided, write to us.
AnTech Dosing Pump Prices
AnTech dosing pump prices are derived from the catalogue price in euros, converted at the exchange rates of the Central Bank of the Republic of Türkiye. On the English site, prices are shown in USD excluding VAT and are recalculated every day at the current exchange rate.
The price is determined mainly by the control type: at the same capacity, the price rises as you move from an analogue model to level control, digital and measurement-controlled models. At the lower end of the list are the analogue Nano and Optima, and at the upper end the measurement-controlled Nova DMPR and DMİA models. On pumps with pH/ORP and free chlorine measurement, the electrode or sensor is not included in the price and is sold separately. You can find the current prices of the 38 models in a single list on our chlorine dosing pump prices page. For prices of the EMD and Aspendose series and other products in the catalogue, write to us.
Original AnTech Spare Parts and Service
We source original replacements for the wear parts of AnTech pumps through the official distributor channel, and we also provide installation, maintenance, calibration and repair services. The catalogue has a separate spare parts table for each series:
- Head and check valve assemblies: The parts of a diaphragm pump that come into contact with the chemical and wear over time.
- Suction and discharge assemblies, hose kits: The connection size varies with capacity. For example, Nova 25 L/h models use 9×12 mm, while the other Nova capacities use 4×6 mm on the suction side and 4×7 mm on the discharge side.
- Suction assembly with level sensor: On level-controlled models, it reports the tank level to the pump.
- Options: Head assembly with automatic air bleed (Nova 3.5 and 10 L/h, Lara 2 L/h 20 bar), signal cable set (included in the package on the Lara DMS) and the ModBus RTU (RS485) communication module for Nova digital models.
When requesting parts or service, tell us the model and capacity on the pump’s label, the chemical you use and the problem. The services are described in detail on our chlorine dosing pump service page, and part replacement on our spare part and diaphragm replacement page. As sodium hypochlorite dries it leaves salt crystals, which build up in the check valves and reduce dosing; checking the foot filter, hoses and check valves regularly extends the life of the parts.
Technical Documents for Tenders and Purchasing
Specification texts prepared with the catalogue values of the AnTech series, which you can use in tender and purchasing documents, are on our chlorine dosing pump technical specification page. Each product page also has a technical table with flow, pressure, stroke, connections, power supply, protection rating and materials. The Technical Documents section of the catalogue contains the ORP electrode operating chart, the proportional control chart, flow–pressure charts, the pool control system wiring diagram and the chemical resistance list. Write to us if you need a data sheet or a dated quotation.
Sources
- AnTech 2025 Product Catalogue (Enelsa, revision KT_25 R02): table of contents, section introductions, technical tables for the Nova, Lara, Optima, Nano, Aspendose and EMD series, spare parts tables and the company information on the back cover.
Frequently Asked Questions
Which company does the AnTech brand belong to?
AnTech products appear in Enelsa's product catalogue. The back cover of the catalogue gives the company name as Enelsa Endüstriyel Elektronik İnş. Taah. San. Tic. Ltd. Şti. and the factory address as Antalya Organised Industrial Zone. That is why the expression "Enelsa AnTech" refers to the manufacturer and the brand together.
Is an AnTech dosing pump bought from AQUABELLA original?
Yes. AQUABELLA is the official distributor of AnTech dosing pumps in Türkiye. Pumps are shipped in their original packaging, backed by AQUABELLA; shipping is free within Türkiye and international shipping is quoted per order.
What do AnTech dosing pump prices depend on?
Mainly on the control type, then on the series and capacity. Prices are calculated by converting the euro catalogue price at the daily Central Bank of the Republic of Türkiye exchange rates, and are shown in USD excluding VAT. On measurement-controlled models, the electrode or sensor is sold separately. The current list is on our prices page.
Which AnTech series should I choose for chlorine dosing?
For small installations with constant flow, the Nano A, Lara A or Optima A; for tank monitoring, the Lara APS or Nova A; for lines with varying flow, the Lara DMS or Nova D; for pools, the Lara PR or Nova DMPR; and for drinking water tanks where free chlorine must be measured directly, the Nova DMİA.
Are AnTech pumps resistant to sodium hypochlorite?
On the Nova, Lara and Optima the pump head is PVDF; in all electromagnetic series the diaphragm is PTFE and the standard O-rings are Viton. In the catalogue's chemical resistance list, PVDF, PTFE and FPM (Viton) are shown as "resistant" to 12.5% sodium hypochlorite. If you use a different chemical or concentration, send us its name and concentration.
Do you sell peristaltic Aspendose and mechanical diaphragm EMD pumps?
Yes. Our site lists 42 EMD mechanical diaphragm and 8 Aspendose peristaltic dosing pumps with current prices. For dishwasher (PER) and OEM Aspendose models, send us your application.
Do you service AnTech dosing pumps?
Yes. For AnTech pumps we provide installation and commissioning, periodic maintenance, calibration, repair and original spare part replacement. When submitting a request, simply tell us the pump model, the chemical you use and the problem.
Can I also buy AnTech measuring instruments, sensors or salt chlorine generators?
These products are included in the AnTech catalogue; at present our site lists electromagnetic, mechanical diaphragm and peristaltic dosing pumps. For measuring instruments, sensors or salt chlorine generators, tell us what you need and your application, and we will clarify the technical information and price together.